Safe and simple to manipulate, Refuel folding stairs ensure safe access from the loading platform to the truck/tanker.
The folding stairs have a solid-weight design and are built according to the highest safety regulations. They have the following special features:
Covering large height variations;
Galvanized or chemical resistant anti-slip steps;
Minimal wear due to bearing and plastic bedding on all movable parts;
Automatic locking in a stowed position;
No hands or feet can be jammed in any position.
Product information
Basic info:
3 - 4 - 5 - 6 steps
Width: 600 / 800 / 1.000 / 2.000 / 3.000 mm, other sizes on request
Balanced by spring cylinders
Manually operated or by pneumatic or hydraulic cylinders
Engineered for reliable, long-term service in the harshest industrial environments, the Swivel Joint Basic Series combines a straightforward design with premium materials to deliver uninterrupted performance and minimal maintenance. Its robust configuration and easy-access flange seal system ensure extended service intervals, making it the ideal solution wherever downtime must be minimized.
Available in carbon steel, stainless steel, or aluminium (upon request)
Seal options: PTFE, Viton® (FKM), and Buna-N for chemical compatibility
Working pressure up to 5 MPa for heavy-duty applications
Flange-mounted seal housing enables seal replacement without full disassembly
Hardened and polished ball race for smooth rotation and extended wear life
Grease-nipple lubrication points for simple, on-site maintenance
Optional internal heating jacket to prevent freezing or viscosity-related issues
Standard sizes: 2″, 3″, 4″, 6″, and 8″ (DN 50/80/100/150/200)
Marine loading arms and ship-to-shore transfer systems
Chemical and petrochemical processing manifolds
Mobile refuelling units and tank trucks
High-cycle hydraulic and pneumatic systems
Any installation requiring fresquent rotation under pressure
Parameter
Materials - Carbon Steel; Stainless Steel; Aluminium
Seal Materials - PTFE; Viton® (FKM); Buna-N
Maximum Working Pressure - 5 MPa (725 psi)
Temperature Range–40 °C to 150 °C (seal dependent)
Standard Sizes - 2″ (DN 50); 3″ (DN 80); 4″ (DN 100); 6″ (DN 150); 8″ (DN 200)
Lubrication - Grease via standard lubrication nipples
Rotation Mechanism - Hardened & polished ball race
Optional Upgrades - Internal heating jacket; custom coatings
Equip your installation with the Swivel Joint Basic Series to experience rock-solid durability, effortless maintenance, and the flexibility required for demanding fluid-transfer operations.
Top loading arms are distinguished by an extra large working area for top loading of road tankers and rail tankers. Their design and construction allow a perfect balance of the loading arm in any position.
This balance can be achieved with counterweights or a spring balance system. By designing the correct
pipe lengths it is possible to charge multi-chamber trucks without even moving the vehicle.
1)Sizes: 2"/3"/4"/6"/8" (DN50/80/100/150/200)
2)Material (depending on the fluid): carbon steel, stainless steel, low-temperature steel
3)Temperature range: -30°C to +230°C
4)Pressure range: 40 bar
5)Balancing system: counterweights, spring cylinder, torsion balancer, hydraulic cylinder
6)Seals: virgin PTFE eventually adding carbon
Design pressure: - 0.08MPa-4.00Mpa
Design temperature:-30° C - +230° C
Application: top loading applications, the connector is upward.
Medium: crude oil, petroleum products and chemicals, etc
Built for the most demanding fluid-transfer applications, the Industrial Loading Arm pairs heavy-duty steel construction with a stainless-steel braided hose to deliver leak-proof durability and multi-axis flexibility. Its robust powder-coated finish withstands corrosion, UV exposure, and abrasion, while precision swivel and pivot joints absorb vessel movement and misalignment—ensuring uninterrupted service in marine, chemical, and mobile refueling environments.
Key Features:
Rugged Construction: thick-wall carbon steel with industrial-grade powder coat for maximum corrosion and wear resistance
Articulated Flexibility: precision-engineered swivel and pivot joints accommodate vessel motion and installation variances
Braided Hose Section: corrugated PTFE core encased in stainless-steel braid for leak-proof performance under pressure and temperature fluctuations
Rapid-Connect Flanges: standard bolt-pattern flanges streamline field fit-up, reducing installation time and downtime
High Pressure Rating: engineered to handle up to 10 bar (145 psi) with built-in safety margin for critical refueling operations
Ideal Applications:
Marine terminals and ship-to-shore transfer systems
Petrochemical and chemical processing plants
Mobile fueling trucks and remote dispensing stations
Technical Specifications:
Model: RIL-1200-BL
Maximum Working Pressure: 10 bar (145 psi)
Hose Length: 1.5 m (59 in) braided stainless-steel section
Materials: carbon steel (EN 10025), PTFE core, stainless-steel braid
Operating Temperature: –40 °C to 150 °C
Ingress Protection: IP65
No results match your search. Try removing a few filters.
