1. Material:
Body: SS
Shaft: SS
Seal: PTFE
Spring: SS
2. Feature:
Improve the flow speed and adopt the easy, convenient structure
Easy install, can automatically cut off in emergency
Use the manual controller to open
Fit EN 13083 and flange TTMA
3. Parameter :
Size - 4"
Flow - 2500L/min
Working pressure - 0.6MPA
operate way - manual
Temperature -20 to 70 ℃
Connect way - flange
Medium - oil
1.Material:
Body: Casting AL alloy
Shaft: SS
Seal: NBR
2.Feature:
Light casting AL structure,high intensity
Used the long service life lift valve surface
Fit API 1004 standard
Easy operate and can install by only one hand
3.Parameter:
Size - 4"
Working pressure - 0.3MPA
Operate way - manual
Temperature -20 to 70 ℃
Medium - oil
1.Material:
Body: casting AL alloy
Shaft: SS
Seal: FPW,NBR
Spring: SS
2.Feature:
Casting AL alloy structure,oxidize treatment
4" NPT/BSNPT internal thread,4" connection
4" flange(TTMA standard)
Reasonable design,3" lift valve
Fit API RP1004 and EN13083 standard
3.Parameter:
Size - 4"
Working pressure - 0.3MPA
Connect way - flange, internal thread
Temperature -20 to 70 ℃
Medium - oil
1.Material:
Body: casting AL alloy
Shaft: SS
Seal: FPW,NBR
Spring: SS
2.Feature:
Casting AL alloy structure,oxidize treatment
4" NPT thread vent
Reasonable design,use the pneumatic switch controller to control
Fit flange TTMA and EN13083 standard
More flow,lower pressure
3.Parameter:
Size - 4"
Flow - 1600L/min
Working pressure - 0.3MPA
operate way - pneumatic
Connect way - flange
Temperature -20 to 70 ℃
Medium - oil
Safe and simple to manipulate, Refuel folding stairs ensure safe access from the loading platform to the truck/tanker.
The folding stairs have a solid-weight design and are built according to the highest safety regulations. They have the following special features:
Covering large height variations;
Galvanized or chemical resistant anti-slip steps;
Minimal wear due to bearing and plastic bedding on all movable parts;
Automatic locking in a stowed position;
No hands or feet can be jammed in any position.
Product information
Basic info:
3 - 4 - 5 - 6 steps
Width: 600 / 800 / 1.000 / 2.000 / 3.000 mm, other sizes on request
Balanced by spring cylinders
Manually operated or by pneumatic or hydraulic cylinders
Engineered for reliable, long-term service in the harshest industrial environments, the Swivel Joint Basic Series combines a straightforward design with premium materials to deliver uninterrupted performance and minimal maintenance. Its robust configuration and easy-access flange seal system ensure extended service intervals, making it the ideal solution wherever downtime must be minimized.
Available in carbon steel, stainless steel, or aluminium (upon request)
Seal options: PTFE, Viton® (FKM), and Buna-N for chemical compatibility
Working pressure up to 5 MPa for heavy-duty applications
Flange-mounted seal housing enables seal replacement without full disassembly
Hardened and polished ball race for smooth rotation and extended wear life
Grease-nipple lubrication points for simple, on-site maintenance
Optional internal heating jacket to prevent freezing or viscosity-related issues
Standard sizes: 2″, 3″, 4″, 6″, and 8″ (DN 50/80/100/150/200)
Marine loading arms and ship-to-shore transfer systems
Chemical and petrochemical processing manifolds
Mobile refuelling units and tank trucks
High-cycle hydraulic and pneumatic systems
Any installation requiring fresquent rotation under pressure
Parameter
Materials - Carbon Steel; Stainless Steel; Aluminium
Seal Materials - PTFE; Viton® (FKM); Buna-N
Maximum Working Pressure - 5 MPa (725 psi)
Temperature Range–40 °C to 150 °C (seal dependent)
Standard Sizes - 2″ (DN 50); 3″ (DN 80); 4″ (DN 100); 6″ (DN 150); 8″ (DN 200)
Lubrication - Grease via standard lubrication nipples
Rotation Mechanism - Hardened & polished ball race
Optional Upgrades - Internal heating jacket; custom coatings
Equip your installation with the Swivel Joint Basic Series to experience rock-solid durability, effortless maintenance, and the flexibility required for demanding fluid-transfer operations.
Body: AL alloy
Shaft: SS
Seal: FPM
Lift valve: AL alloy
Handle: AL alloy
Rod: SS
2. Feature:
1) light casting AL, hard treatment
2) Easy and reliable seal design can use efficient double seal gasket
3) Fit API RP1004
4) Only need a single handle to operate
3. Parameter:
Size - 4"
Working pressure - 0.6MPA
Pressure drop - 0.024MPA
Operate way - half automatic
Temperature -20 to 70 ℃
Medium - oil
1. Material:
Body: AL alloy
API valve head: hard AL
Lift valve: AL alloy
Seal: FPW and NBR
Operate shaft: SS
2. Feature:
Casting AL structure and using the spring to increase service life
Decrease the fluid line to raise the flow
Easy to change and inside use the SS to prove intensity Fit API1004, EN13083 and flange TTMA standard
3. Parameter :
Size - 4"
Flow - 2500L/min
Working pressure - 0.6MPA
operate way - manual
Connect way - flange
Temperature -20 to 70 ℃
Medium - oil.
Top loading arms are distinguished by an extra large working area for top loading of road tankers and rail tankers. Their design and construction allow a perfect balance of the loading arm in any position.
This balance can be achieved with counterweights or a spring balance system. By designing the correct
pipe lengths it is possible to charge multi-chamber trucks without even moving the vehicle.
1)Sizes: 2"/3"/4"/6"/8" (DN50/80/100/150/200)
2)Material (depending on the fluid): carbon steel, stainless steel, low-temperature steel
3)Temperature range: -30°C to +230°C
4)Pressure range: 40 bar
5)Balancing system: counterweights, spring cylinder, torsion balancer, hydraulic cylinder
6)Seals: virgin PTFE eventually adding carbon
Design pressure: - 0.08MPa-4.00Mpa
Design temperature:-30° C - +230° C
Application: top loading applications, the connector is upward.
Medium: crude oil, petroleum products and chemicals, etc
Built for the most demanding fluid-transfer applications, the Industrial Loading Arm pairs heavy-duty steel construction with a stainless-steel braided hose to deliver leak-proof durability and multi-axis flexibility. Its robust powder-coated finish withstands corrosion, UV exposure, and abrasion, while precision swivel and pivot joints absorb vessel movement and misalignment—ensuring uninterrupted service in marine, chemical, and mobile refueling environments.
Key Features:
Rugged Construction: thick-wall carbon steel with industrial-grade powder coat for maximum corrosion and wear resistance
Articulated Flexibility: precision-engineered swivel and pivot joints accommodate vessel motion and installation variances
Braided Hose Section: corrugated PTFE core encased in stainless-steel braid for leak-proof performance under pressure and temperature fluctuations
Rapid-Connect Flanges: standard bolt-pattern flanges streamline field fit-up, reducing installation time and downtime
High Pressure Rating: engineered to handle up to 10 bar (145 psi) with built-in safety margin for critical refueling operations
Ideal Applications:
Marine terminals and ship-to-shore transfer systems
Petrochemical and chemical processing plants
Mobile fueling trucks and remote dispensing stations
Technical Specifications:
Model: RIL-1200-BL
Maximum Working Pressure: 10 bar (145 psi)
Hose Length: 1.5 m (59 in) braided stainless-steel section
Materials: carbon steel (EN 10025), PTFE core, stainless-steel braid
Operating Temperature: –40 °C to 150 °C
Ingress Protection: IP65
1.Material:
Body: AL alloy
Shaft: SS
Seal: FPW
2.Feature:
Light casting AL structure, has high intensity
Easy operate and connect rapidly
Can efficiently reduce the leakage
Can not open lift valve when connect wrongly
3.Parameter:
Size - 3"
Working pressure - 0.3MPA
operate way - manual
Connect way -Thread connection 3" BSP
Medium - oil
Temperature -20 to 70 ℃
No results match your search. Try removing a few filters.
